- Home
- -
- Filament
Filament
-
Plugging
Plugging is usually caused by insufficient extrusion pressure inside the nozz... -
Surface roughness
Surface roughness is usually related to material, slicing, and temperature. &... -
Interlayer cracking
Print cracking and warping Material: ABS, ASA, PA, PC and other materials and... -
Not Sticking to the Bed
If the first layer is not sticking to the build platform, it will create prob... -
Print distortion
The material temperature is too high, the model can not be quickly cooled and... -
Warp
warp Non-stick base plate The corner of the model or ... -
Interlayer Dislocation
The upper part of the model is misaligned with the lower part, and the layer ... -
Precautions for Use of 3D Filaments
-
How to solve the problem of filament breaking during the second re-winding process?
How to solve the problem of filament breaking during the second re-winding pr... -
First Layer Not Sticking
Cause: First layer gap too large Solution: If the nozzle is too far from the ... -
Tip Deformation (Pointy Parts Warping)
Cause: Inadequate cooling Solution: Small pointed features don’t cool quickl... -
Missing Layers or Gaps in Print
Cause 1: Print speed too fast Solution: If print speed is too fast, the extru...
