- Home
- -
- FAQs
FAQs
-
Plugging
Plugging is usually caused by insufficient extrusion pressure inside the nozz... -
Surface roughness
Surface roughness is usually related to material, slicing, and temperature. &... -
Interlayer cracking
Print cracking and warping Material: ABS, ASA, PA, PC and other materials and... -
Not Sticking to the Bed
If the first layer is not sticking to the build platform, it will create prob... -
Print distortion
The material temperature is too high, the model can not be quickly cooled and... -
Film, residue
Print larger models trough and the surface of the printed parts appear residu... -
Model priming
Separation occurs between the layer and the layer. Leveling: platform and scr... -
Surface not dry
Surface is not dry Post-treatment: Insufficient alcohol concentration or clea... -
Cracking
Cracking of parts occurs Post-treatment: alcohol is not completely cleaned in... -
Warp
warp Non-stick base plate The corner of the model or ... -
Interlayer Dislocation
The upper part of the model is misaligned with the lower part, and the layer ... -
Incorrect size
Size and design size have large deviation Slicing: Too short exposure time wi...
